SP5736P User’s Manual
46
Click on the <Go Preset> button to call the preset point. Then the dome
camera will rotate to the preset position automatically.
4.4.4
Run Dome Camera Sequence/Auto Pan/Cruise
<Sequence>, <Auto Pan> and <Cruise> are provided for users to run dome
camera. However, these functions can only be setup at the dome camera side.
Thus, users must first setup these functions, and then can execute them via
the NVR. The following briefly describes these functions.
Sequence
Input a desired Sequence Line number, and click on <
Run Sequence
>
button. The dome camera will begin moving forward each scene sequentially
as programmed.
Auto Pan
Before running <Auto Pan>, users have to input a preferred Auto Pan Path
number. After inputting the number, click on <
Run Auto Pan
> button, and the
dome camera will start moving horizontally as recorded.
Cruise
First, users have to input the specified Cruise Path number. Click on <
Run
Cruise
> button, and the dome camera will start touring around as recorded.
To stop running dome camera, click on <ESC> icon to exit.
NOTE:
The total number of Cruise Paths, Auto Pan Paths, and
Sequence Lines are varied according to different IP dome cameras.
Summary of Contents for SP5736P
Page 1: ......
Page 57: ...SP5736P User s Manual 56...
