4.
Set Netmask
Enter the netmask used by your network. By combining the netmask and static IP address you have
configured, validate that your network and host addresses are correct for your network.
5.
Network Name
If required, the network name can be modified by typing the new name into the 'NETWORK NAME' textbox
under the 'ADVANCED SETTINGS' dropdown. This field will set the hostname of the port.
By default, the network name will be 'gt3k-time[port number]'.
6.
PRP and VLANs
– To provision PRP on the port, see
.
– To provision VLAN use on the port, see
9.5.5. Provisioning VLAN Settings
.
7.
PTP and NTP
– To provision PTP on the port, see
.
– To provision NTP on the port, see
9.5.2
DHCP IP Address
This section describes how to provision an Ethernet port with a DHCP IP Address.
1.
Select DHCP for IPv4 Method
Select 'DHCP' from the 'IPV4 METHOD' radio buttons. This should be selected by default.
Provisioning
©
2022 Microchip Technology Inc.
and its subsidiaries
Manual
DS00004572A-page 79
