9.5.7
Provisioning PTP
This section describes how to provision PTP on the GridTime 3000.
Note:
Both an NTP server/client and PTP server/client can be simultaneously set up on a GridTime 3000 Ethernet
Port.
1.
Navigate to PTP Sub Tab
Navigate the PTP sub tab by clicking on the 'PTP Settings' Tab in the port's configuration window.
2.
Enable PTP Traffic
Select 'ENABLE' on the PTP Traffic radio buttons.
This will reveal the PTP settings for the port.
3.
Follow the instructions in one of the following sections for guidance on provisioning each PTP profile:
–
9.5.7.1. Peer to Peer Default Profile
–
9.5.7.2. End to End Default Profile
–
9.5.7.3. C37.238-2011 Power Profile
–
9.5.7.4. C37.238-2017 Power Profile
–
9.5.7.5. 61850-9-3 Power Utility Profile
–
9.5.7.6. G.8275.1 Telecom Profile
–
9.5.7.7. G.8265.1 Telecom Profile
9.5.7.1
Peer to Peer Default Profile
This section describes how to provision a GridTime 3000 with the Peer to Peer Default Profile.
1.
Select Peer to Peer Default Profile
Select 'P2P' from the 'PTP PROFILE' dropdown.
Provisioning
©
2022 Microchip Technology Inc.
and its subsidiaries
Manual
DS00004572A-page 93
