4.
Insert the crimp into socket and press firmly into place.
5.
Repeat steps 1 through 3 for the other two wires.
6.
Add the wire clamp, fastening the two screws.
Figure 14-3. Wire clamp added to hold wires in place
7.
Add rubber strain relief.
Figure 14-4. Rubber strain relief
8.
Clip the second half of the housing in place and fasten the screw.
Figure 14-5. Assembled connector
Appendix C: Crimping Connectors
©
2022 Microchip Technology Inc.
and its subsidiaries
Manual
DS00004572A-page 297
