–
9.12.1. Provisioning SNMP Notifications
–
9.12.2. Provisioning Syslog Notifications
Note:
All SNMP and Syslog notifications are sent from the GridTime 3000's admin Ethernet port only, ensure
SNMP trap clients are set up with the IP address of the admin Ethernet port.
8.
Save Settings
Click the 'SAVE' button to write the settings to the GridTime 3000.
A 'Saved!' notification will appear in the bottom right corner of the page indicating that the settings have
successfully been written to the GridTime 3000.
9.
Set up SNMPv3 Users
Follow the instructions in
9.12.3. Provisioning SNMP Users
if SNMPv3 USM privacy is to be used.
9.12.1
Provisioning SNMP Notifications
This section describes how to provision SNMP notifications.
1.
Navigate to SNMP Config Window
Navigate to the SNMP Config window by clicking on the SNMP Config icon, then clicking the SNMP Config
settings bar.
1. Click Here to
Bring Up SNMP
Configuration Tab
2. Click Here to
Bring Up
SNMP Window
3. SNMP Window
will Appear
2.
Add New SNMP Subscription
Click the big blue 'ADD' button under the 'SNMP SUBSCRIPTIONS' heading to add a new SNMP subscription.
Provisioning
©
2022 Microchip Technology Inc.
and its subsidiaries
Manual
DS00004572A-page 197
