Note:
If the user's current password is not known, an administrator can reset the password by following the
steps found here:
10.4. Changing a User's Password (Admin Only)
10.4
Changing a User's Password (Admin Only)
This section describes how to change the GridTime 3000's user passwords.
1.
To modify a password for a GridTime 3000 user, navigate to the CMT authentication module by adding ':444' to
the end of the IP address you would normally use to access the CMT in your browser's URL textbox.
This should bring up the new authentication module login screen.Enter the login details for an administrator
user and click 'LOGIN'.
Operating
©
2022 Microchip Technology Inc.
and its subsidiaries
Manual
DS00004572A-page 213
