2.
Set VLAN ID
Type your network's VLAN ID into the 'ID' textbox. VLAN IDs in the range of 0-4094 are supported, a VLAN ID
of 0 will disable VLAN tagging.
3.
Set VLAN Priority
Type the priority you want to be included in the VLAN tags on outgoing traffic into the 'priority' textbox. Priority
values in the range of 0-7 are supported.
4.
Save Settings
Click the 'SAVE' button to write the settings to the GridTime 3000.
A 'Saved!' notification will appear in the bottom right corner of the page indicating that the settings have
successfully been written to the GridTime 3000.
9.5.6
Provisioning NTP
This port describes how to setup a GridTime 3000 Ethernet port as an NTP server or client.
Note:
Both an NTP Server/Client and PTP Server/Client can be simultaneously set up on a GridTime 3000 Ethernet
Port.
1.
Navigate to NTP Sub Tab
Navigate to the NTP sub tab by clicking on the 'NTP Settings' Tab in the port's configuration window.
2.
Enable NTP Traffic
Select 'ENABLE' from the “NTP TRAFFIC” radio buttons.
Provisioning
©
2022 Microchip Technology Inc.
and its subsidiaries
Manual
DS00004572A-page 85
