Page 21
optoCONTROL 1202
5.2.1
Power Supply, Inputs and Outputs
T
he connections of power supply, inputs and outputs are effected via a 8-pin cable connector, Binder, series
712. As a matching part you require an adequate cable connector.
Different converted cables with open ends are optionally available.
The optional available power supply-/output cables SCA1202-x feature following bending radii:
- 53 mm (fixed),
- 80 mm (flexible).
Pin Assignment
Color SCA1202-x
1
2
3
4
5
6
7
8
View on solder-pin side male
cable connector
1
Ground (0 V)
white
2
Power 15 ... +30 VDC
brown
3
INO (External trigger)
green
4
IN1 (Teach/Reset)
yellow
5
OUT0 (-)
grey
6
OUT1 (+)
pink
7
OUT2 (OK)
blue
8
Analog output (0 ... 10 V)
red
Fig. 8 Pin- and color assignment for 8-pin male connector and output cable SCA1202-x
External Triggering, IN0
When a HIGH-pulse is applied at the digital input INO, the external triggering (measuring value output) is set
at the hardware.
RESET-Function, IN1
When a HIGH-pulse of less than 750 ms duration is applied, the RESET function is performed at the receiver.
This resets the current maximum and minimum values.
