Page 5
optoCONTROL 1202
1.
Safety
The handling of the system assumes knowledge of the instruction manual.
1.1
Symbols Used
The following symbols are used in this instruction manual:
Indicates a hazardous situation which, if not avoided, may result in minor or moder-
ate injury.
Indicates a situation which, if not avoided, may lead to property damage.
Indicates a user action.
i
Indicates a user tip.
1.2
Warnings
Caution - use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
Connect the power supply and the display output device according to the safety regulations for electrical
operating equipment.
>
Danger of injury
>
Damage to transmitter/ receiver
Avoid shock and knocks on the sensor and the controller.
>
Damage to transmitter/ receiver
Supply voltage must not exceed specified limits.
>
Damage to transmitter/ receiver
Protect connecting cable from damage.
>
Damage to transmitter/ receiver
