Page 6
optoCONTROL 1202
Avoid damage (scratches) to the protective windows of the transmitter and receiver through unsuitable clean-
ing methods or cleaning solvents
> Inaccurate, erroneous measurements
Do not touch the protective windows of the laser and receiver with the fingers. Wipe off any fingerprints imme
-
diately.
> Inaccurate, erroneous measurements
Avoid permanent action of dust or splashed water on the measurement channel. Use protective housings.
>
Damage to transmitter/ receiver
1.3
Notes on CE Identification
The following applies to optoCONTROL 1202:
- EU directive 2014/30/EU
- EU directive 2011/65/EU, “RoHS” category 9
Products which carry the CE mark satisfy the requirements of the quoted EU directives and the European
standards (EN) listed therein. The EC declaration of conformity is kept available according to EC regulation,
article 10 by the authorities responsible at
MICRO-EPSILON Eltrotec GmbH
Manfred-Wörner-Straße 101
73037 Göppingen / Germany
The measuring system is designed for use in industry and satisfies the requirements.
