Page 64
Service, Repair
MSC7401 / 7802 / 7602 Miniature sensor controller for inductive displacement sensors
6.
Service, Repair
If the controller or the sensor are defective, please
send in the affected parts for repair or replacement.
If the cause of a fault cannot be clearly identified,
please send the entire measuring system to:
MICRO-EPSILON MESSTECHNIK
GmbH & Co. KG
Koenigbacher Str. 15
94496 Ortenburg / Germany
Tel. +49 (0) 8542/ 168-0
Fax +49 (0) 8542/ 168-90
[email protected]
www.micro-epsilon.com
7.
Liability for Material Defects
All components of the device have been checked and tested for functionality at the factory. However, if de-
fects occur despite our careful quality control, MICRO-EPSILON or your dealer must be notified immediately.
The liability for material defects is 12 months from delivery. Within this period, defective parts, except for
wearing parts, will be repaired or replaced free of charge, if the device is returned to MICRO-EPSILON with
shipping costs prepaid.
Any damage that is caused by improper handling, the use of force or by repairs or modifications by third
parties is not covered by the liability for material defects.
Repairs are carried out exclusively by MICRO-EPSILON. Further claims can not be made. Claims arising from
the purchase contract remain unaffected.
In particular, MICRO-EPSILON shall not be liable for any consequential, special, indirect or incidental
damage.
In the interest of further development, MICRO-EPSILON reserves the right to make design changes without
notification. For translations into other languages, the German version shall prevail.
