MICRO-EPSILON induSENSOR MSC7602, Operating Instructions Manual

Page: 21 / 96

Page 21
Installation and Assembly
MSC7401 / 7802 / 7602 Miniature sensor controller for inductive displacement sensors
4.2.3 MSC7602 Model
If required, install a DIN rail bus connector, e.g., ME22,5 TBUS 1,5/4P1S KMGY (Phoenix: 2201732) , see
A 1 , onto the DIN rail.
If required, connect the mating plug, e.g., MCVR 1.5/5-ST-3.81 (Phoenix: 1827156) , see A 1 , with the bus
connector.
Position the MSC7602 controller on the DIN rail and press it down until it snaps in , see Fig. 6 .
2
1
Fig. 6 Installation of controller Fig. 7 Dismantling of controller
Dismantling
For dismantling, pull the locking element on the controller forwards, e.g., using a screwdriver
1
, see
Fig. 7.
Tilt the controller in order to remove it from the DIN rail
2
, see Fig. 7