MICRO-EPSILON ILD 1420-10, Instruction Manual

Page: 70 / 122

Page 70
Set Sensor Parameter
optoNCDT 1420
7.5.3.2 Output Scaling with Key Select
LED
state
Measuring
Green, red, yellow
depends on
measuring position Color according
to measuring
position flashes red
approx. 1 Hz flashes green
approx. 1 Hz
Key
select
Position the
measuring
object to 4 mA Position the
measuring
object to 20 mA Key
select
Key
select
red
t 0  5 min 2 s  30 s  30 s t 1 t 2 t 3 t 4 t 6 t 7 t 8 t 5
yellow yellow
min.
30 ms min.
30 ms
Fig. 40 Flow chart for output scaling
LED state
Measuring
Green, red, yellow
depends on
measuring position Color according
to measuring
position flashes red approx. 1 Hz red
t 0

5 min 2 s
200 ms t 5 - t 3 = 2 s
5 ... <10 s t 1 t 2 t 3 t 4 t 5
yellow
Error
Hold the key
select
Fig. 41 Flow chart for the return of output scaling
If the key
Select
is pressed longer than 10 s or not within the timeframe while doing the return of the output
scaling, an error is shown via
State
LED. In this case the
State
LED is blinking red with 8 Hz for 2 s.