Page 42
Operation
optoNCDT 1420
Standard
Ceramics, metal
Multi-surface
1
Printed circuit boards (PCB),
hybrid material
Light penetration
1
Plastics (Teflon, POM),
Materials with large penetration
depth of the laser
In the area
Signal quality
you can switch between four given basic settings (static, balanced, dynamic
and no averaging).
You can instantly see the reaction in the diagram and system configuration.
The area
System configuration
displays the current settings for measuring rate, averaging and RS422 in
blue lettering. Changes to the settings are possible by means of the slide
Signal quality
or by means of
the tab
Settings
.
The area
Diagram type
enables the change between graphical display of the measurement value or the
video signal, each as value time diagram.
i
After programming all the settings are to be stored permanently in a set of parameters. The next time
you turn on the sensor they are available again.
Therefore use the button
Save settings
.
i
If the sensor starts with user defined measurement setting (setup), see Chap.
quality is not possible.
1) Available for the sensor models ILD1420-10/25/50.
Summary of Contents for ILD 1420-10
Page 8: ...optoNCDT 1420...
Page 121: ......
