75
ķ
„
PEN
REMOTE“ (Pentax) or
„
SAM
REMOTE“ (Samsung) or
„
SON
REMOTE“ (Sony)
• Press the
button, thus the selec-
ted remote mode is set, in the exam-
ple “OLY REMOTE” (Olympus). The
ratio of the reflectors is 1:1. Group
A (only with CAN, NIK and OLY) is
automatically set if another group
has not been selected for a previous
application.
• If the two reflectors should be set at
an unequal ratio (
R
atio) then press
the button
or
to change the
ratio of both the reflectors.
The setting thus made will be automa-
tically saved.
In the operating modes
“CAN REMOTE” or “NIK REMOTE”
and/or “OLY REMOTE”, various sla-
ve channels and various slave
groups can be set when several slave
flash units are used (see Chapter
4.2).
OK
In the operating modes
“PEN REMOTE” and/or
“SAM REMOTE” and/or
“SON REMOTE”, only different slave
channels can be set when several
slave flash units are used (see
Chapter 4.2 and operating manual
of the camera).
4.2 Setting remote channel and
remote group
Four independent remote channels
(CHANNELS 1 to 4) are available, so
that several remote systems in the
same space does not cause mutual
disruption Master and/or controller
and slave flash units that belong to the
same remote system must be set to the
same remote channel.
In the case of Sony and Pentax
cameras “CHANNEL ALL” must be
set if a fixed channel is not used in
the remote system.
In the case of “CHANNEL ALL”, all
set channels are activated.
In the remote operating modes,
groups can be set in addition to the
channels (CHANNEL) in order to con-
1:1
OLY
GrA
8:1
OLY
GrA
☞
☞
☞
708 47 0018-A1 MB 15 MS-1 20.10.2008 11:52 Uhr Seite 75
