76
ķ
trol the desired slave flash unit of a
specific group.
The setting of groups (GROUP A, B,
C) is only possible in Canon, Nikon
and Olympus remote control modes.
Setting a channel (CHANNEL) and a
group (GROUP) in a camera-specific
remote system
• Keep the button “AF/SELECT”
pressed on the flash unit until the
following message appears in the
display:
• Press the button
on the flash
unit. In the display appears::
• Press the button
on the flash
unit. The most recently used setting
appears in the display, e.g.:
• Press the button
on the flash
unit. In the display appears:
• Press button
and select the
desired channel (CHANNEL ALL –
CHANNEL 1..4).
S E L
S E L
S E L
• Press button
, the selected
remote channel is set. In the display
appears:
• Press button
and select the des-
ired group (GROUP A, GROUP B,
GROUP C).
• Press button
and the desired
group is set.
• Press button
, the selected remo-
te channel and remote group are
set.
5 Manual wireless slave
mode
Even when
cameras are used without
a camera-specific remote system
,
wireless release of one or more slave
flash units is possible.
Several digital cameras fire one or
more measuring pre-flashes and/or
flashes for a fraction of a second
before the picture is taken in order to
reduce the „red-eye effect“. The mea-
suring pre-flashes cannot usually be
deactivated on the camera.
OK
S E L
S E L
S E L
S E L E C T
⊃
S E L
OK
M O D E L L I N G
L I G H T
O F F
O N
S E L
OK
SYSTEM
OLY
REMOTE
Ch ALL Gr A
CHANNEL ALL
S E L
CHANNEL 3
S E L
GROUP A
S E L
S E L
OK
SYSTEM
OLY
REMOTE
Ch 3 Gr A
1:1
OLY
Ch3 GrA
GROUP A
S E L
708 47 0018-A1 MB 15 MS-1 20.10.2008 11:52 Uhr Seite 76
