78
ķ
• Press button
drücken. In the
display appears:
• Switch-on (YES) the “LEARN” func-
tion with the
button.
• Press
button. In the display
appears:
The flash unit waits for a flash light
from the camera’s own flash unit.
The bar display continually fills as
long as no light impulse is received
from the camera’s own flash unit.
• Press the release button on the
camera so that the camera’s own
flash unit is activated.
If a light impulse has been received
by the mecablitz 15MS-1 digital,
the bar display stops filling. In the
display, “LEARN OK” appears and
a red light in the „AF-/SELECT“ but-
ton
lights up briefly as confirma-
tion.
The mecablitz 15MS-1 digital has
now learnt to recognise the flash
light of the camera flash unit. In the
display appears:
OK
S E L
• If both the reflectors should be set to
an unequal ratio (
R
atio) then press
the button
or
to change the
ratio of both the reflectors.
• If you wish to use partial lighting,
then press the button
Following display appears:
• To set partial lighting, press the but-
tons
or
and thus change the
value. In the display appears, for
example.
The setting thus made will be automa-
tically saved
If the “Learn function” has already
been operated once, these settings
are retained until the learn function
is used for the next time.
If the setting to reduce the “red-eye
effect” is changed, the learn function
must be repeated.
P / R
S E L
OK
L E A R N
NO
YES
S E L
OK
L E A R N
NO
YES
L E A R N O K
1:1
P / R
SL
R
atio
⊃
TA K E A
P I C T U R E
⊃
4:1
P / R
SL
R
atio
1/1
P / R
SL
P
ower
1/4
P / R
SL
P
ower
☞
☞
708 47 0018-A1 MB 15 MS-1 20.10.2008 11:52 Uhr Seite 78
