6 Technical data
Master frequency output [X1]
The connector [X1] also accommodates the master frequency output (encoder emulation).
To use this function, [X1] must be configured as the master frequency output.
Characteristic
Value
Number of lines
Programmable 1 to 2
13
and 2
14
lines/revolution
Track signals A, B
As per the RS422 specification
Limit frequency
f
limit
> 10 MHz
The signals are generated based on the angle of rotation of the encoder with a freely
programmable line count.
Please also note that the track signals will not be automatically output with a constant
frequency. They may also be generated as so-called "pulse packets" depending on the
covered rotational angle of the source. This means that the interface for any downstream
circuits must be suitable for incremental encoders. As a result, the measurement of gate
times or the analysis of the time between two lines for determining a speed value is
possible only to a limited extent.
Mounting Instructions BL 4000-M and BL 4000-D
Page 82 of 95
Summary of Contents for 9200-4104-2000
