MI 2893 / MI 2892 / MI 2885
General Recorder
75
Table 55: General recorder settings description and screen symbols
General recorder is active, waiting for start condition to be met.
After start conditions are met (defined start time), instrument will
capture waveform snapshot and start (activate) General recorder.
General recorder is active, recording in progress
Note: Recorder will run until one of the following end conditions is
met:
STOP key was pressed by user
Given Duration criteria was met
Maximal record length was reached
SD CARD is full
Note: If recorder start time is not explicitly given, recorder start
depends on Real Time clock multiple of interval. For example:
recorder is activated at 12:12 with 5-minute interval. Recorder will
actually start at 12:15.
Note: If during record session instrument batteries are drained, due
to long interruption for example, instrument will shut down
automatically. After power restauration, it will automatically start
new recording session.
Capturing of predefined Alarms under progress
Capturing of predefined Events under progress
Capturing of Inrush under progress
Capturing of RVC under progress
Capturing of Signalling under progress
Capturing of Transient under progress
Profile
Select recording profile:
Standard profile. Include all measurement in record.
Suitable for most PQ measurement
Limited profile. Include limited set of measurements (most
important). Suitable for long records with short interval (1-
week record with 1 second interval). See section 4.4 for
details.
Interval
Define the measured interval. Available settings are from 1 second
to 120 minutes.
Available intervals: 1 sec, 3 sec, 5 sec, 10 sec, 1 min, 2 min, 5 min, 10
min, 15 min, 30 min, 60 min, 120 min
Note: In case, that measured period is shorter than 10 seconds, than
we not suggest to simultaneously detection of Event Waveforms and
Transient, which could slowdown the analyser and may cause a
problem saving data to the SD card.
Start time
Define start time of recording:
Manual, pressing function key F1
At the given time and date.
