MI 2893 / MI 2892 / MI 2885
Remote instrument connection (over Internet / Internet(3G/GPRS) /
Intranet (LAN))
161
PowerView settings
Press on Remote
in toolbar in order to open remote connection settings, as shown on figure
below.
Figure 136: PowerView v3.0 remote connection settings form
User needs to fill following data into form:
Table 131: Instrument selection form parameters
Serial Number:
Required
Enter Power Quality Instrument serial number
Phone Number:
Not Required
Leave this field empty
Secret Key:
Required
Enter number code which was entered in
instrument Communication settings menu as:
Secret Key.
Description:
Optional
Enter instrument description
By pressing
button, user can add another instrument configuration.
button is used to
remove selected instrument configuration from the list. Connection procedure will begin, by pressing on
button.
4.3.4
Remote connection
Establishing connection
After entering PowerView v3.0 remote settings and pressing on Connect button, Remote Connection
window will appear (shown below).
