MI 2893 / MI 2892 / MI 2885
Main Features
15
Figure 2: Front plates and marking labels
1.1
Main Features
Full compliance with power quality standard IEC 61000-4-30 Class A (MI 2893/MI 2892)
Full compliance with power quality standard IEC 61000-4-30 Class S (MI 2885)
Simple and powerful recorder with microSD memory card (sizes up to 32 GB are supported).
4 voltage channels with wide measurement range: up to 1000 Vrms, CAT III / 1000 V, with
support for medium and high voltage systems.
Simultaneous voltage and current (8 channels) sampling, 16-bit AD conversion for accurate
power measurements and minimal phase shift error.
4 current channels with support for automatic clamp recognition and automatic range selection.
Compliance with IEC 61557-12 and IEEE 1459 (Combined, fundamental, nonfundamental power)
and IEC 62053-21 (Energy).
High speed transient sampling > 1MSamples/sec simultaneously on all 8 channels (4xU & 4xI)
(MI 2893)
Transient selection between N /GND (MI 2893)
Transient recorder with envelope or level triggering, with sampling frequency 49 kHz (MI 2892
/MI 2885)
4.3’’ TFT colour display.
Waveform/inrush recorder, which can be triggered on Event/Alarms/Level U/Level I/Interval;
transient recorder for phase/neutral lines (voltage and current simultaneously) with level and
envelope trigger selection run simultaneously with general recorder.
