MI 2893 / MI 2892 / MI 2885
Harmonics / inter-harmonics
58
VIEW
Switch’s view between harmonics and inter-harmonics.
Keys in VIEW window:
Selects option.
Confirms selected option.
Exits selection window without change.
Selects between single phases and neutral channel harmonics / inter-
harmonics bars.
1
2 3 N
Shows harmonics / inter-harmonics components for phase L1.
1
2
3 N
Shows harmonics / inter-harmonics components for phase L2.
1
2
3
N
Shows harmonics / inter-harmonics components for phase L3.
1
2 3
N
Shows harmonics / inter-harmonics components for neutral channel.
12
23 31
Shows harmonics / inter-harmonics components for phase L12.
12
23
31
Shows harmonics / inter-harmonics components for phases L23.
12
23
31
Shows harmonics / inter-harmonics components for phases L31.
METER
Switches to METER view.
BAR
Switches to BAR view.
AVG
Switches to AVG (average) view (available only during recording).
TREND
Switches to TREND view (available only during recording).
Scales displayed histogram by amplitude.
Scrolls cursor to select single harmonic / inter-harmonic bar.
Toggles cursor between voltage and current histogram.
Triggers Waveform snapshot.
Returns to the “MEASUREMENTS” submenu.
3.8.3
Harmonics Average Histogram (Avg Bar)
During active GENERAL RECORDER, Harmonics average histogram AVG view is available (see section 3.14
for instructions how to start GENERAL RECORDER). In this view average voltage and current harmonic
values are shown (averaged from beginning of the recording to the current moment). Harmonics average
histogram screen displays dual bar graphs. The upper bar graph shows average voltage harmonics and the
lower bar graph shows average current harmonics.
F2
ENTER
F3
F4
ENTER
