Metapace T-2 Command Manual Download Page 7

Page: 7 / 54

Rev. 1.00

- 7 -

Metapace T-2

n=4 : Continuous paper sensor status

Bit

Off/On

Hex

Decimal

Function

0 Off 00 0 Fixed.
1 On 02 2 Fixed.

Off

Paper roll near-end sensor : paper adequate.

Paper roll near-end sensor : paper near end.

Off

Paper roll near-end sensor : paper adequate.

Paper roll near-end sensor : paper near end.

4 On 10 16 Fixed.

Off

Paper roll near-end sensor : paper present.

Paper roll near-end sensor : paper not present.

Off

Paper roll near-end sensor : paper present.

Paper roll near-end sensor : paper not present.

7 Off 00 0 Fixed.

[Notes]

▪

If print data includes a character string with this command, the printer

performs this command. User must consider this.

- For example : Bit image data accidentally might include a data string with this command.

▪

Do not embed this command within another command.

- For example : Bit image data might include this command.

▪

This command is ignored block data is transmitted.

DLE ENQ n
[Name]
[Format]

[Range]
[Description]

Real-time request to printer.

ASCII DLE

ENQ n

Hex 10

Decimal

16 5 n

≤

▪

Responds to a request from the host computer.

- n specifies the requests as follows :

Request

Works the same as when the paper FEED button is pressed once during waiting
status during the operation of the GS ^ command.

Recovers from an error and restarts printing from the line where the error occurred.

Recovers from an error after clearing the receive and print buffers.

[Notes]

▪

Specify n=1 or 2 after removing the cause of the error.

▪

If print data includes a character string with this command, the printer

performs the command. User must consider this.

- For example : Bit image data accidentally might include a data string with this command.

▪

Do not embed this command within another command.

- For example : Bit image data might include this command.

▪

This command is ignored block data is transmitted.

▪

This command is ignored block data is transmitted.

Summary of Contents for T-2























































Search results

Summary of Contents for T-2

Reviews:

Related manuals for T-2

Brands by name

Popular brands

Metapace T-2, Command Manual

Search results

Summary of Contents for T-2

Reviews:

Related manuals for T-2

Brands by name

Popular brands