Metapace T-2 Command Manual Download Page 50

Page: 50 / 54

Rev. 1.00

- 50 -

Metapace T-2

▪

The status to be transmitted is the four bytes that follows.

- First byte (printer information)

Bit Off/On Hex Decimal Function

0 Off 00 0 Fixed.
1 Off 00 0 Fixed.

Off 00 0 Drawer kick-out connector pin 3 is LOW.

On 04 4 Drawer kick-out connector pin 3 is HIGH.
Off 00 0 Online.

On 08 8 Offline.

4 Off 10 16 Fixed.

Off

Cover is closed.

Cover is opened.

Off 00 0 Paper is not being fed by using the paper FEED button.

On 40 64 Paper is being fed by using the paper FEED button.

7 Off 00 0 Fixed.

▪

When the cover is open while the printing is stopped, the printer becomes offline.

- Second byte (printer information)

Bit Off/On Hex Decimal Function

Off

Not on online waiting status.

During online waiting status.

Off

Panel button OFF.

Panel button ON.

Off

No mechanical error.

Mechanical error has occurred.

Off

No Auto Cutter error.

Auto Cutter error occurred.

4 Off 00 0 Fixed.

Off

No unrecoverable error.

Unrecoverable error has occurred.

Off

No automatically recoverable error.

On 40 64 Automatically recoverable error has occurred.

7 Off 00 0 Fixed.

- Third byte (paper sensor information)

Bit Off/On Hex Decimal

Function

Off 00 0 Paper roll near-end sensor : paper adequate.

On 01 1 Paper roll near-end sensor : paper near end.
Off 00 0 Paper roll near-end sensor : paper present.

On 02 2 Paper roll near-end sensor : paper not present.
Off

Paper roll end sensor : paper present.

Paper roll end sensor : paper near end.

Off

Paper roll end sensor : paper present.

On 08 8 Paper roll end sensor : paper not present.

4 Off 00  0  Fixed.
5 Off 00  0  Reserved.
6 Off 00  0  Reserved.
7 Off 00  0  Fixed.

Summary of Contents for T-2























































Search results

Summary of Contents for T-2

Reviews:

Related manuals for T-2

Brands by name

Popular brands

Metapace T-2, Command Manual

Search results

Summary of Contents for T-2

Reviews:

Related manuals for T-2

Brands by name

Popular brands