Rev. 1.00
- 27 -
Metapace T-2
GS ( L pL pH m fn [parameter]
GS 8 L p1 p2 p3 p4 m fn [parameter]
[Name]
[Format]
[Description]
Select graphics data.
ASCII GS
( L
pL pH m fn [parameter]
Hex 1D
28
4C pL pH m fn [parameter]
Decimal 29 40 76 pL pH m fn [parameter]
ASCII GS
( L
p1 p2 p3 p4 m fn [parameter]
Hex 1D
28
4C p1 p2 p3 p4 m fn [parameter]
Decimal 29 40 76 p1 p2 p3 p4 m fn [parameter]
* In the description below GS ( L is used for the explanation.
- Note that GS ( L and GS 8 L have the same Function.
- If the [parameter] of each format exceeds 65533 bytes use GS 8 L.
▪
Processes graphics data according to the function code fn.
fn
Format
Function No.
Function
0, 48 GS ( L pL pH m fn
Function 48
Transmits the NV graphics memory
capacity.
2, 50 GS ( L pL pH m fn
Function 50
Prints the graphics data in the print
buffer.
3, 51 GS ( L pL pH m fn
Function 51
Transmits the remaining capacity of
the NV graphics memory.
64
GS ( L pL pH m fn d1 d2
Function 64
Transmits the defined NV graphics
key code list.
65
GS ( L pL pH m fn d1 d2 d3
Function 65 Deletes all NV graphics data.
66
GS ( L pL pH m fn kc1 kc2
Function 66
Deletes the specified NV graphics
data.
67
GS ( L pL pH m fn a kc1
kc2 b xL xH yL yH [c
d1...dk]1...[c d1 dk]b
Function 67
Defines the raster graphics data in
the non-volatile memory.
69
GS ( L pL pH m fn kc1 kc2
x y
Function 69
Prints the specified NV graphics
data.
112
GS ( L pL pH m fn a bx by c
xL xH yL yH d1...dk
Function 112
Stores the raster graphics data in the
print buffer memory.
▪
pL, pH specifies (pL + pH x 256) as the number of bytes after pH(m, fn,
and [parameter]).
▪
Frequent write command executions by this command may damage the
NV memory. Therefore, it is recommended to write to the NV memory no
more than 10times a day.
▪
While processing this command, the printer is BUSY while writing data to
the NV graphics memory and stops receiving data. Therefore it is
prohibited to transmit data including the real-time commands during the
execution of this command.
