Metapace T-2, Command Manual

Page: 45 / 54

Rev. 1.00
- 45 -
Metapace T-2
[Notes] ▪ Description of the Other Information data sent :
Hex Decimal Condition
30H 48 Printing is possible
31H 49 Printing is impossible
▪ This command does not print the QR Code symbols.
▪ Users must consider the quiet zone for the QR Code symbols (upward
and downward spaces and left and right spaces for the QR Code symbols
specified in the specifications for the QR Code symbols.)
GS * x y [d1...d(x x y x 8)]
[Name]
[Format]
[Range]
[Description]
Define downloaded bit image.
ASCII GS * x y [d1...d(x x y x 8)]
Hex 1D 2A x y [d1...d(x x y x 8)]
Decimal 29 42 x y [d1...d(x x y x 8)]
1 ≤ x ≤ 255
1 ≤ y ≤ 48 (where x x y ≤ 1536)
0 ≤ d ≤ 255
▪ Defines the downloaded bit image using the number of dots specified by x
and y.
- x specifies the number of dots in the horizontal direction.
- y specifies the number of dots in the vertical direction.
▪ When the memory switch 8-7 is On, the user-defined character and the
downloaded bit image cannot be defined simultaneously. The downloaded
bit image data is cleared with this command.
GS / m
[Name]
[Format]
[Range]
[Description]
Print downloaded bit image.
ASCII GS / m
Hex 1D 2F m
Decimal 29 47 m
0 ≤ m ≤ 3, 48 ≤ m ≤ 51
▪ Prints the defined downloaded bit image in m mode.
m Mode Vertical dot density Horizontal dot density
0, 48 Normal 180 dpi 180 dpi
1, 49 Double-width 180 dpi 90 dpi
2, 50 Double-height 90 dpi 180 dpi
3, 51 Quadruple 90 dpi 90 dpi
dpi : dots per 25.4mm {1"}
GS :
[Name]
[Format]
[Description]
Start/end macro definition.
ASCII GS :
Hex 1D 3A
Decimal 29 58
▪ Starts or ends macro definition.
- The contents of the macro can be defined up to 2048 bytes.