Metapace T-2, Command Manual

Page: 54 / 54

Rev. 1.00
- 54 -
Metapace T-2
[Description]
▪ Prints a raster bit image in m mode.
- m specifies the bit image mode.
m Mode Vertical dot density Horizontal dot density
0, 48 Normal 180 dpi 180 dpi
1, 49 Double-width 180 dpi 90 dpi
2, 50 Double-height 90 dpi 180 dpi
3, 51 Quadruple 90 dpi 90 dpi
dpi : dots per 25.4mm {1"}
- xL, xH specifies (xL + xH x 256) byte(s) in the horizontal direction for the bit image.
- yL, yH specifies (yL + yH x 256) dot(s) in the vertical direction for the bit image.
- d specifies the definition data of the bit image data.
GS w n
[Name]
[Format]
[Range]
[Description]
[Notes]
Set bar code width.
ASCII GS w n
Hex 1D 77 n
Decimal 29 119 n
2 ≤ n ≤ 6
n=3
▪ Set the horizontal size of the bar code, using n as follows :
Binary-level Bar Code
n
Multi-level Bar
Code Module Width
(mm)
Thin element width
(mm)
Thick element width
(mm)
2 0.282 0.282 0.706
3 0.423 0.423 1.129
4 0.564 0.564 1.411
5 0.706 0.706 1.834
6 0.847 0.847 2.258
▪ Multi-level bar codes are as follows :
- UPC-A, UPC-E, JAN13, HAN8, CODE93, CODE128
▪ Binary-level bar codes are as follows :
- CODE39, ITF, CODABAR