8
OPERATING MANUAL - Z587 BALER
Baler identification. General safety rules
TRACTOR REQUIREMENTS
16.
Power demand [kW/HP]
37/50
17.
PTO speed [rpm]
540
18.
Hydraulic system
1 double-action
directional control
valve + 1 single-action
directional control valve
19.
Electrical system [V]
12
20.
Transport (transit) speed [km/h]
20
PICKUP
21.
Pickup type
4-beam drum
with prongs
22.
Pickup width [mm]
1800
23.
Maximum pickup service width [mm] 1520
24.
No. of pickupprongs
44
25.
Service height adjustment
Mechanical gear,
4 height settings
WRAPPING
26.
No. of cord reels
4
27.
No. of net reels
1
TYRES
28.
Type
400/60 – 15.5 14 PR
29.
Tyre pressure [kPa]
250
PTO DRIVE SHAFT
30.
Type/brand
Bondioli Pavesi
31.
Code
7104121CE077098
32.
Transmitted torque [Nm]
1700
1.5. GENERAL SAFETY STANDARDS
Read and understand this Operating Manual before operating the
baler to avoid danger. Follow the general rules and local regulations
related to work safety and machine operation.
The baler has been designed and built to assure maximum safety of
use.
Read and understand all Sections of the Manual before starting the
machine for the first time. It will be too late to do that once you begin
your work!
Metal Fach will not be responsible for any damage caused by failure
to follow this Operating Manual.
Metal Fach will not be responsible for any damage caused by non-
intended use and/or unauthorised modifications of the machine.
Periodically inspect the technical condition of the machine. Pay
particular attention to proper performance of all safety equipment.
All safety guards shall be installed according to the manufacturer's
instructions.
This baler may only be operated by qualified personnel
who has read and understood this Operating Manual.
WARNING!
Check that the machine works properly, it is working
properly and its moving parts are properly secured
before work.
WARNING!
