Maintenance and adjustment
35
OPERATING MANUAL - Z587 BALER
•
Realign the safety holes together by manually turning the baling
drum, insert the new safety bolt and tighten it.
•
Reinstall the guard in place.
Fig. 36. Replacing the safety share bolt of the baling drums.
5.8. SHARPENING THE CORD BLADE
Sharpen the cord cutter after rolling 1000 bales and before every
working season. Also sharpen the cutter when the cord is not cut.
The cutter blade taper must be 30°.
Fig. 37. Sharpening the cutter.
5.9. ADJUSTING THE CORD WRAPPER
The bale wrapping wind spacing is adjusted by two brakes on the
outer sides of the unit.
Fig. 38. Adjusting the wrapping spacing.
