6
OPERATING MANUAL - Z587 BALER
Baler identification. General safety rules
If the machine is sold to another user, it must be supplied with the
Operating Manual. It is advised that the supplier has a confirmation
stating that the Manual has been transferred together with the machine,
signed by the buyer and filed.
Keep the Manual in a safe place that is accessible to the user and the
operating personnel throughout the operating life of the machine.
Thoroughly read and understand the Operating Manual.
If the Operating Manual is damaged or lost, give the Manual number
or the machine nameplate data to obtain a new copy.
Before starting the machine after a prolonged standstill, thoroughly
read the information about operating the machine and the safety rules
listed in the Manual.
Read and understand all Sections of this Manual. Should you have any
questions, consult your local Metal Fach representative. The addresses
of representatives and service stations can be found at our website
www.metalfach.com.pl. This machine shall be used, serviced and
repaired only by persons who understand its performance characteristics
and know the work safety procedures.
The manufacturer will not be responsible for any damage caused by
failure to follow the rules contained in this Manual!
USE ORIGINAL SPARE PARTS ONLY!
You can order your spare parts from the local Metal Fach
representative or directly from the Metal Fach head office in Sokółka.
1.2. INTENDED USE OF THE BALER
The Z587 round baler is intended for collecting plant material raked
in banks and rolling it into bales. The baler can work with hay and silage
with the maximum moisture content of 20% and 60% respectively, and
harvesting straw.
All work operations can be performed by one person, i.e. the operator
inside the tractor cabin.
Any use of the machine not specified herein shall be considered as
non-intended use. Metal Fach will not be responsible for any damage to
persons, animals or property by improper use.
1.3. BALER DESIGN
Fig. 3. Structure of the Z587 baler
