36
OPERATING MANUAL - Z587 BALER
Maintenance and adjustment
The cord wrapping spacing is gradually controlled by a two-stage
pulley "P":
Wind the cord around the pulley "P" "stage 1" to obtain wider spacing
of the wound cord.
Wind the cord around the pulley "P" "stage 2" to obtain denser
spacing of the wound cord.
Fig. 39. Adjusting the bale cord wrap spacing.
5.10. ADJUSTING THE NET WRAPPER
The net reel cannot unwind itself freely. It needs a slight braking. The
brake pressure is adjusted by a spring the tension of which is controlled
by placing the T-handle in one of the adjustment slots.
If the reel braking is too strong, the spreading rollers will not
unwind the net.
To adjust the number of net winds on the bale, open the right-hand
side guard and choose the right slot for the number of wind you need.
You can also adjust the spreading roller pressure. This is done by
operating the spring-loaded tensioners "M" on the sides:
If the pressure between the rollers is too high, the net will shift to the
bale center and will not wrap its entire width.
If the pressure between the rollers is too low, the rollers will not
unwind the net.
Fig. 40. Adjusting the net wrapper.
Stage 1
Stage 2
Wind 2 times
