Operating the machine
23
OPERATING MANUAL - Z587 BALER
Fig. 12. Net cutter safety.
•
Lift the gate and place the cord reels in the chamber.
•
Make sure that the home position of the cord guide is exactly as
shown in Fig. 13. Otherwise turn the pulley P counter-clockwise to
reach the correct position.
Fig. 13. Cord guide.
•
Connect the reel A with the reel B by tying the ends of the
respective reels together, and do the same with the reels C and D.
Make sure that the knots are very tight and not too big to prevent
free movement of the cord.
•
Pass the cords through the cord brakes on the left and right-hand
sides under the reel storage bins.
•
Wind the cord S1 around the pulley P.
•
Pass the string between the knurled driving rollers. Leave the cord
hanging loose 15-20 cm out of the last eyelet.
•
Pass the string S2 between the driving rollers. Leave the cord
hanging loose 15-20 cm out of the last eyelet.
•
Only one cord can be used to wrap bales, use the cord S1.
15 cm
