3-12
Revised 08.2021
Operator’s Manual: 405 SLD Seed Express
™
Bulk Seed Tender
®
®
31
ENABLE/DISABLE DISPLAY
Hold both INCREASE and DECREASE push
buttons on the control panel simultaneously for 10
seconds to enable or disable the display.
BAR PAGE
On the BAR PAGE where all weights are shown
separately, holding down the TARE button on the
control panel for 10 seconds will zero the reading
for all the bars.
5.4.2 Display Panel
(1) Weight Displayed in Pounds. (2) Signal
Strength. (3) Percentage of Battery Life.
5.4.3 Display Messages
Pressing the POWER button turns the remote
transmitter ON and displays the message
“Meridian Mega Remote”.
If the “NO LINK” message appears, the remote
transmitter is not communicating with the control
panel on the seed tender. Make sure the ON/OFF
key switch is in the ON position.
The remote transmitter will display the WEIGHT of
the seed in the seed compartments in pounds. It
also displays the battery life of the two AA batteries
in a percentage of remaining life.
When the POWER button is pressed and held,
the message “Transmitter is turning OFF” will be
displayed.
31
ENABLE/DISABLE DISPLAY
Hold both INCREASE and DECREASE push
buttons on the control panel simultaneously for 10
seconds to enable or disable the display.
BAR PAGE
On the BAR PAGE where all weights are shown
separately, holding down the TARE button on the
control panel for 10 seconds will zero the reading
for all the bars.
5.4.2 Display Panel
(1) Weight Displayed in Pounds. (2) Signal
Strength. (3) Percentage of Battery Life.
5.4.3 Display Messages
Pressing the POWER button turns the remote
transmitter ON and displays the message
“Meridian Mega Remote”.
If the “NO LINK” message appears, the remote
transmitter is not communicating with the control
panel on the seed tender. Make sure the ON/OFF
key switch is in the ON position.
The remote transmitter will display the WEIGHT of
the seed in the seed compartments in pounds. It
also displays the battery life of the two AA batteries
in a percentage of remaining life.
When the POWER button is pressed and held,
the message “Transmitter is turning OFF” will be
displayed.
31
ENABLE/DISABLE DISPLAY
Hold both INCREASE and DECREASE push
buttons on the control panel simultaneously for 10
seconds to enable or disable the display.
BAR PAGE
On the BAR PAGE where all weights are shown
separately, holding down the TARE button on the
control panel for 10 seconds will zero the reading
for all the bars.
5.4.2 Display Panel
(1) Weight Displayed in Pounds. (2) Signal
Strength. (3) Percentage of Battery Life.
5.4.3 Display Messages
Pressing the POWER button turns the remote
transmitter ON and displays the message
“Meridian Mega Remote”.
If the “NO LINK” message appears, the remote
transmitter is not communicating with the control
panel on the seed tender. Make sure the ON/OFF
key switch is in the ON position.
The remote transmitter will display the WEIGHT of
the seed in the seed compartments in pounds. It
also displays the battery life of the two AA batteries
in a percentage of remaining life.
When the POWER button is pressed and held,
the message “Transmitter is turning OFF” will be
displayed.
If the “NO LINK” message appears, the remote
control handset is not communicating with the
control panel on the seed tender. Make sure the
ON/OFF key switch is in the ON position.
3.4.2 Handset Display Panel:
(1) Weight Displayed in Pounds.
(2) Signal Strength.
(3) Percentage of Battery Life.
3.4.3 Handset Display Messages:
Pressing the POWER button turns the remote
control handset transmitter ON and displays the
message “Meridian Mega Remote”.
