Revised 08.2021
4-7
Operator’s Manual: 405 SLD Seed Express
™
Bulk Seed Tender
®
®
4.3.2 Hydraulic System:
Hydraulic oil and filter change is recommended
annually or every 400 hours of operation using
an AW HVI Hydraulic ISO 32 oil.
IMPORTANT:
Never run the hydraulic pump
unless the hydraulic oil tank is full.
1. Place a large waste oil container under the
tank drain port.
2. Drain the hydraulic tank by removing the
drain plug from the tank.
- Allow the tank to drain completely.
3. Remove and replace the oil filter.
4. Apply a thin coat of oil to the rubber seal of
the new oil filter. Hand-tighten only.
5. Re-install the drain plug.
6. Fill the tank to the fill line at the top of the
gauge with AW HVI Hydraulic ISO 32 oil.
7. Replace the cap.
8. Start the engine and cycle all the cylinders
several times.
9. Recheck the oil level in the tank and add as
needed.
4.3.3 Hydraulic Manual Override:
The hydraulic manifold is equipped with a
manual override feature.
The top valves have a push/pull mechanism that
will allow you to move the hydraulic components
on the tender.
Fig 71 - Hydraulic oil reservoir and filter
52
10.2.2 Hydraulic Manual Override
The hydraulic manifold is equipted with a manual
overide feature. The top valves have a push/
pull mechanism that will allow you to move the
hydraulic components on the tender.
10333
PROJECT/CUSTOMER NAME:
Manifold HIC Valve Assembly 2160059A 400SLD
PART DESCRIPTION:
HYDRAULIC SYSTEMS
A
PART/DRAWING NUMBER:
REV:
12/14/2016
SCALE:
SHEET No:
DMP
CJ
DRAWN BY DATE:
DRAWN BY:
WEIGHT: 3.58 kg
1 OF 1
www.meridianmfg.com
CHECKED BY:
FABRICATION: PURCHASED
MATERIAL
:
Generic
THIS DRAWING IS THE EXCLUSIVE PROPERTY OF MERIDIAN
MFG INC. DUPLICATION BY ANY MEANS IS PROHIBITED
WITHOUT PERMISSION FROM MERIDIAN MFG INC.
DESCRIPTION
PART #
QTY
ITEM
Manifold HIC Valve Assembly 2160059A 400SLD
10333
1
1
1
10.3 ENGINE
For any questions concerning the Honda
®
engine
not provided in this manual, refer to the OEM
manual that was provided with the seed tender.
To contact Honda
®
, refer to the OEM Literature
section in this manual.
10.3.1 Approved Fuel
Use a regular unleaded automotive gasoline for all
operating conditions. The fuel tank capacity is 1.0
liter (2.1 US pints).
Fig 72 - Hydraulic valves
