Mercury MerCruiser Axius SeaCore 350 MAG, Manual

Page: 44 / 170

Section 2 - Getting to Know Your Power Package
Page 36 90-8M0050539
eng
MAY 2011
Press the "SYNC" button on the CAN trackpad to turn auto synchronization on or off. When the sync LED is yellow, the "SYNC"
button has been pressed, but the conditions are not right for auto synchronization to engage. When the sync LED turns red, engine
synchronization has been engaged. The engines will remain synchronized as long as engine speed is over 900 RPM for two
seconds, remote control handles are positioned within 10% of each other, and the engines are below 95% throttle opening.
To disengage the auto synchronization feature, press the "SYNC" button.
SYNC
1 LEVER
NEUTRAL
TROLL
THROTTLE
ONLY DOCK
TRANSFER
+
-
22590
Helm Transfer
!
WARNING
Avoid serious injury or death from loss of boat control. The boat operator should never leave the active station while engine is
in gear. Helm transfer should only be attempted while both stations are manned. One‑person helm transfer should only be
performed while engine is in neutral.
NOTE: Neutral position is preferred when doing a station transfer. If conditions do not allow the remote control to be placed in the
neutral position, a helm transfer can be done while in gear.
The helm transfer function allows the boat operator to select which helm is in control of engine operation. Pressing the
"TRANSFER" button two times allows engine control to be transferred to a new helm. When a helm transfer is initiated, the control
will automatically start adjusting engine RPM and gear position to match the control handle setting at the new helm. Adjust the
control handles to the desired throttle and gear position.
Once the "TRANSFER" button is pressed, the transfer LED will light up and one beep will sound. Press the "TRANSFER" button
again to complete the helm transformation. When helm transformation is complete, another beep will sound and the transfer LED
will turn off.
NOTE: There is a 10 second time frame to complete a helm transfer. If the helm transfer is not completed, the action will be
cancelled and a double beep will sound. Pressing the "TRANSFER" button again will reinitiate a helm transfer.
SYNC
1 LEVER
NEUTRAL
TROLL
THROTTLE
ONLY DOCK
TRANSFER
+
-
22593
Synchronizing Helms Prior to Transfer
Pressing the "TRANSFER" button allows the boat operator 10 seconds to match up the control handle settings at the new helm
with the handle settings that are at the old (to be inactive) helm. If the handles are not matched, the neutral lights will flash. The
light blinks faster as the handles are nearing match position. Once the light stays on continuously, the handles are matched and
the button can be pressed again to complete the transfer. This completes the transfer process, and gives control to the new station.
If the helm transfer is not completed within 10 seconds, the action will be cancelled.