Mercedes-Benz TRAVEGO, Operating Instructions Manual

Page: 465 / 581

Practical advice
Safety precautions for work carried out in the engine compartment
Safety precautions for work carried
out in the engine compartment
Danger.
Never leave the engine running when
work is being carried out in the engine
compartment.
Danger.
Prevent the engine from being switched
on without authorisation. Remove the key
from the ignition starter switch.
Danger.
If the engine is at operating temperature,
leave it to cool down - risk of burns.
The replacement V-belts, spare parts and
assembly tools required are not supplied
with the bus as standard.
If the bus has broken down and it is ne-
cessary to replace a drive belt but no
suitable gauge is available for checking
the tension of the new belt, drive the
bus to the nearest OMNIplus Service
Partner as soon as possible and have
the belt tension and tightening torques
checked.
Removing the drive belts (OM 470)
Danger.
Do not carry out work in the engine com-
partment unless the engine has been
switched off and the ignition key has
been removed. If the engine is at normal
operating temperature, give it sufficient
time to cool down: risk of burns.
Caution:
Replacement V-belts and some of the
tools listed below are not supplied with
the bus as standard. Only the use of
OMNIplus original replacement V-belts
is permitted.
TRAVEGO / TRAVEGO M / TRAVEGO L (Euro VI)/07.2014 GB
453