Mercedes-Benz TRAVEGO, Operating Instructions Manual

Page: 125 / 581

Driver's area controls
Steering column switch for light and wiper functions
2 Main-beam: Main-beam head-
lamps ON (with dipped-beam
headlamps switched on)
3 Headlamp flasher: Pull the
stalk upwards
4 Indicate right with automatic
reset: Press the switch stalk
beyond the pressure point
until it engages in position.
Note:
One-touch indicators for a
lane change: Press the switch
stalk only briefly (not beyond
the pressure point). The turn
signals flash five times.
5 Indicate left with automatic
reset: Press the switch stalk
beyond the pressure point
until it engages in position.
Note:
One-touch indicators for a
lane change: Press the switch
stalk only briefly (not beyond
the pressure point). The turn
signals flash five times.
6 Wipe and wash: Press the
sleeve on the switch stalk
inwards towards the steer-
ing column. With windscreen
wipers switched off = wind-
screen wipe and wash
7 Windscreen wipers: Turn the
sleeve on the switch stalk:
Speed 0 = OFF. Speed. . .
. .= Slow intermittent wipe
or wiping with rain sensor.
Speed......= Rapid intermit-
tent wipe or wiping with rain
sensor. Speed I = Slow con-
tinuous wiping. Speed II =
Rapid continuous wiping.
Caution:
Switch stalk position. . . .
: If the rain sensor is active,
the windscreen wiper may
switch on inadvertently if dirt
were to settle on the wind-
screen in dry weather. The
windscreen wiper blades or
the windscreen itself could
then be damaged by dry wip-
ing. Keep the windscreen
wipers switched off in dry
weather.
Note:
Switch stalk position . . . .
: If the rain sensor is act-
ive, the wiping frequency is
adjusted automatically as ap-
propriate to how heavy it is
raining.
TRAVEGO / TRAVEGO M / TRAVEGO L (Euro VI)/07.2014 GB
113