Mercedes-Benz TRAVEGO, Operating Instructions Manual

Page: 501 / 581

Practical advice
Fitting the wheel trims
Fitting the wheel trims
Fitting the wheel trims
M40_00-0008-01
Place the wheel trim on the clamp
ring (4). When you do this you
should insert the retaining clip lugs
(3) of the wheel trim into the clamp
ring cut-out (4). Attach the lower
retaining clips and press on. Then
press the wheel trim into the other
retaining clips.
Danger.
Make sure that the wheel trim is seated
correctly. All retaining clips (3) must be
fixed behind clamp ring (4).
M40_00-0008-01
Push in the last top retaining clips
with the clamp ring detached. This
considerably reduces the amount of
force required and you also avoid
the possibility of damaging the wheel
trim. After you have fitted the wheel
trim, reach into the ventilation open-
ings and hook clamp ring (2) into
retaining clip (3) again. The retain-
ing clips must not rest on a balance
weight.
TRAVEGO / TRAVEGO M / TRAVEGO L (Euro VI)/07.2014 GB
489