Mercedes-Benz TRAVEGO, Operating Instructions Manual

Page: 555 / 581

Practical advice
Changing bulbs
Environmental protection
Comply with legal requirements when you
dispose of bulbs or fluorescent tubes.
Danger.
Gas discharge bulbs operate at high
voltage, high pressure and high temperat-
ure. There is a risk of fatal injury if live
parts of the lamp and ballast unit are
touched. Do not touch the gas discharge
bulb if the headlamp is damaged.
Danger.
Do not change gas discharge bulbs your-
self. Always have defective gas discharge
bulbs changed at a qualified special-
ist workshop which has the necessary
specialist knowledge and tools for the
work required. EvoBus recommends an
OMNIplus Service Partner for this pur-
pose.
Danger.
It is essential that work relevant to safety
or work on safety-related systems be car-
ried out at a qualified specialist work-
shop.
Changing bulbs in the
headlamps/front turn signal
Remove cover (quick-release lock on
right).
Note:
The headlamp is accessible from the pas-
senger compartment (right) or via the
service cover under the driver's area
(left). This cover can be opened using
the handle on the left next to the driver's
seat.
When changing the turn signals, turn
the bulb socket anti-clockwise and
take it out. Press the bulb in, turn it
anti-clockwise and remove.
Note:
Refit in reverse order.
M54_00-0102-01
To replace the headlamp bulb, push
the wire loop to the side and remove
the plastic cover.
Disconnect bulb cable (5).
Detach retaining spring (6) and take
out the bulb.
TRAVEGO / TRAVEGO M / TRAVEGO L (Euro VI)/07.2014 GB
543