Mercedes-Benz GLC, Operator'S Manual

Page: 146 / 390

Problem
Possible causes/consequences and M Solutions
The engine is not running
smoothly and is misfir-
ing.
There is a malfunction in the engine electronics or in a mechanical
component of the engine management system.
X
Only depress the accelerator pedal slightly.
Otherwise, non-combusted fuel may get into the catalytic converter
and damage it.
X
Have the cause rectified immediately at a qualified specialist work-
shop.
The coolant temperature
display indicates a value
within the red band.
The coolant level is too low. The coolant is too hot and the engine is no
longer being cooled sufficiently.
X
Stop as soon as possible and allow the engine and the coolant to
cool down.
X
Check the coolant level (
Y
page 322). Observe the warning notes
as you do so and add coolant if necessary.
DYNAMIC SELECT switch
Mercedes-AMG vehicles
General information
Use the DYNAMIC SELECT switch to select the
drive program.
Available drive programs for Mercedes-
AMG GLC 43 4MATIC:
S+ Sport Plus Particularly sporty driving
characteristics
S Sport Sporty driving characteris-
tics
C Comfort Comfortable and economi-
cal driving characteristics
E Economy Particularly economical
driving characteristics
I Individual Individual settings
Available drive programs for Mercedes-
AMG GLC 63 /GLC 63 S :
RACE
(S ‑ MODEL)
Driving characteristics suit-
able for a race circuit
S+ Sport Plus Particularly sporty driving
characteristics
S Sport Sporty driving characteris-
tics
C Comfort Comfortable and economi-
cal driving characteristics
I Individual Individual settings
Depending on the drive program selected the
following vehicle characteristics will change:
R
the drive (engine and transmission manage-
ment)
R
the suspension
R
the steering
R
the driver assistance systems
R
ESP
®
(Mercedes-AMG GLC 63 /
GLC 63 S )
R
the position of the exhaust flap (Mercedes-
AMG GLC 63 /GLC 63 S )
R
the setting of the ECO start/stop function
R
the availability of gliding mode
R
the climate control
Further information for automatic drive program
characteristics (
Y
page 150).
Additionally, in drive program I you can config-
ure the respective vehicle characteristics using
the multimedia system. You can find informa-
tion about this under "DYNAMIC SELECT" in the
vehicle's Digital Operator's Manual.
Each time you start the engine with the Smart-
Key or the Start/Stop button, drive program C is
activated. Further information about starting
the engine (
Y
page 138).
144
DYNAMIC SELECT switch
Dr
iving
and
parking