Mercedes-Benz GLC, Operator'S Manual

Page: 361 / 390

the Tire and Loading Information placard on
the B-pillar on the driver's side.
You can find more tire pressures for various
operating conditions in the tire pressure table
inside the filler flap.
Observe the information on tire pressure
when doing so (
Y
page 352).
X
Make sure that the tire pressure is correct on
all four wheels.
X
Make sure that the SmartKey is in position 2
in the ignition lock (
Y
page 136).
X
Press ò on the steering wheel to call up
the menu list.
X
Press 9 or : on the steering wheel to
select the Service menu.
X
Confirm by pressing a on the steering
wheel.
X
Press 9 or : to select Tire Pres‐
sure .
X
Press a to confirm.
The multifunction display shows the current
tire pressure of each wheel or the Tire
pressure will be displayed after
driving a few minutes message.
X
Press the : button.
The Use Current Pressures as New Ref‐
erence Values message is shown on the
multifunction display.
If you wish to confirm the restart:
X
Press the a button.
The Tire Press. Monitor Restarted mes-
sage is shown on the multifunction display.
After driving for a few minutes, the system
checks whether the current tire pressures are
within the specified range. The new tire pres-
sures are then accepted as reference values
and monitored.
If you wish to cancel the restart:
X
Press the % button.
The tire pressure values stored at the last
restart will continue to be monitored.
Radio type approval for the tire pres-
sure monitor
Country Radio type approval number
USA FCC ID: MRXGG4
FCC ID: MRXMC34MA4
Canada IC: 2546A-GG4
Loading the vehicle
Instruction labels for tires and loads
G
WARNING
Overloaded tires can overheat, causing a
blowout. Overloaded tires can also impair the
steering and driving characteristics and lead
to brake failure. There is a risk of accident.
Observe the load rating of the tires. The load
rating must be at least half of the GAWR of
your vehicle. Never overload the tires by
exceeding the maximum load.
Two instruction labels on your vehicle show the
maximum possible load.
(1) The Tire and Loading Information placard is
on the B-pillar on the driver's side. The Tire
and Loading Information placard shows the
maximum permissible number of occu-
pants and the maximum permissible vehicle
load. It also contains details of the tire sizes
and corresponding pressures for tires
mounted at the factory.
(2) The vehicle identification plate is on the B-
pillar on the driver's side. The vehicle iden-
tification plate informs you of the gross
vehicle weight rating. It is made up of the
vehicle weight, all vehicle occupants, the
fuel and the cargo. You can also find infor-
mation about the maximum gross axle
weight rating on the front and rear axle.
The maximum gross axle weight rating is
the maximum weight that can be carried by
one axle (front or rear axle). Never exceed
the maximum load or the maximum gross
axle weight rating for the front or rear axle.
Loading the vehicle
359
Whee
ls
an
d
tires
Z