Mercedes-Benz GLC, Operator'S Manual

Page: 105 / 390

Installing and removing rear head
restraints
X
Release the rear seat backrest and fold it
slightly forward (
Y
page 293).
X
To remove: pull the head restraint up to the
stop.
X
Press release catch : and pull the head
restraint out of the guides.
X
To re-install: insert the head restraint so that
the notches on the bar are on the left when
viewed in the direction of travel.
X
Push the head restraint down until you hear it
engage in position.
X
Fold back the rear seat backrest until it
engages.
Adjusting the 4-way lumbar support
:
Raises the backrest contour
;
Softens the backrest contour
=
Lowers the backrest contour
?
Hardens the backrest contour
You can adjust the contour of the front seat
backrests individually to provide optimum sup-
port for your back.
Switching the seat heating on/off
Switching on/off
G
WARNING
Repeatedly switching on the seat heating can
cause the seat cushion and backrest pads to
become very hot. The health of persons with
limited temperature sensitivity or a limited
ability to react to high temperatures may be
affected or they may even suffer burn-like
injuries. There is a risk of injury.
Therefore, do not switch the seat heating on
repeatedly.
!
Heat accumulation can occur if the seat
heating is switched on and there are objects
or underlays placed on the seats, e.g. seat
cushions or child seats.
This can lead to damage to the seat surface.
Make sure that no objects or underlays are
placed on the seats when the seat heating is
switched on.
Front seats
Rear seats
The three red indicator lamps in the button indi-
cate the heating level you have selected.
The system automatically switches down from
level 3 to level 2 after approximately eight
minutes.
The system automatically switches down from
level 2 to level 1 after approximately ten
minutes.
The system automatically switches off approx-
imately 20 minutes after it is set to level 1.
Seats
103
Seat
s,
ste
ering
wheel
and
mi
rro
rs
Z