Please observe the country-specific laws on the
use of rear fog lamps.
Operating the combination switch for the lights
1
High beam
2
Turn signal light, right
3
Headlamp flashing
4
Turn signal light, left
#
Use the combination switch to select the
desired function.
Switching on high beam
#
Turn the light switch to the
L
or
Ã
position.
#
Push the combination switch in the direction
of arrow
1
.
When the high beam is activated, the indicator
lamp for low beam
L
will be deactivated
and replaced by the indicator lamp for high
beam
K
.
Switching off high beam
#
Push the combination switch in the direction
of arrow
1
or pull it in the direction of arrow
3
.
Headlamp flashing
#
Pull the combination switch in the direction of
arrow
3
.
Turn signal light
#
To indicate briefly: push the combination
switch briefly to the point of resistance in the
direction of arrow
2
or
4
.
The corresponding turn signal light will flash
three times.
#
To indicate permanently: push the combina-
tion switch beyond the point of resistance in
the direction of arrow
2
or
4
.
Vehicles with Active Lane Change Assist:
R
A turn signal indicator activated by the
driver may continue to operate for the
duration of the lane change.
R
If the driver indicated directly beforehand
but a lane change was not immediately
possible, the turn signal indicator may acti-
vate automatically.
142 Light and sight
Summary of Contents for GLC 200 4MATIC
