#
Make sure that the socket cover is
closed properly before closing the socket
flap. This can otherwise result in damage
which may prevent the socket flap from
being opened again.
*
NOTE Damage to the vehicle socket or the
charge port due to incorrect handling
Do not use excessive force (maximum 300 N)
to insert the charge port into the vehicle
socket to the stop. You may otherwise damage
the vehicle socket, the charge port or their
contacts.
#
If you feel there is increased resistance,
pull the charge port out of the socket
and reinsert it.
Requirements:
R
The transmission is in position
j
.
R
The vehicle is unlocked or the distance
between the key and the vehicle does not
exceed 1 m.
R
The vehicle is switched off. The
õ
display
in the driver's display is off.
R
The charging cable is not taut.
Depending on the vehicle's equipment and on the
national version, your vehicle is equipped with one
of the following vehicle sockets:
R
Type 1 for charging with alternating current
(mode 2 or 3)
R
Combo 1 for charging with alternating current
(mode 2 or 3) and charging with direct current
(mode 4)
R
Type 2 for charging with alternating current
(mode 2 or 3)
R
Combo 2 for charging with alternating current
(mode 2 or 3) and charging with direct current
(mode 4)
Combo 1 vehicle socket
224 Driving and parking
Summary of Contents for GLC 200 4MATIC
