Mercedes-Benz GLC 200 4MATIC, Owner'S Manual

Page: 115 / 601

#
Push both release knobs
1
and
2
at the
same time in the direction of the arrow and
pull out the head restraint.
#
Fold the rear seat backrest back until it
engages.
Fitting
#
Release the rear seat backrest and fold it for-
wards slightly (
/
page 124).
#
Insert the head restraint such that the notches
on the bar are on the left when viewed in the
direction of travel.
#
Push the head restraint down until it engages.
#
Fold the rear seat backrest back until it
engages.
Configuring the seat settings
Multimedia system:
4
©
5
Comfort
5
Seat
Adjusting the air cushions
#
In the corresponding menu, adjust the air
cushions for Lumbar or Side bolsters .
Setting the seat heating balance
#
Select Heating settings .
#
Select Seat heating balance .
#
Adjust the heat distribution for the desired
seat.
Setting automatic seat adjustment
&
WARNING Risk of becoming trapped dur-
ing adjustment of the driver's seat after
calling up a driver profile
Selecting a user profile may trigger an adjust-
ment of the driver's seat to the position saved
under the user profile. You or other vehicle
occupants could be injured in the process.
#
Make sure that when the position of the
driver's seat is being adjusted via the
multimedia system, no people or body
parts are in the seat's range of move-
ment.
If there is a risk of someone becoming trap-
ped, stop the adjustment process immedi-
ately:
#
a) Tap the warning message on the cen-
tral display.
or
#
b) Press a memory function position but-
ton or a seat adjustment switch on the
driver's door.
The adjustment process will be stopped.
Multimedia system:
4
©
5
Comfort
5
Seat
5
Position seat automatically
Manually adjusting driver's seat and steering
wheel position to body size
The vehicle calculates a suitable driver's seat and
steering wheel position on the basis of the driver's
body size and sets this directly.
#
To set the unit of measurement: select cm or
ft/in
.
#
Set the size using the scale.
112 Seats and stowing