Damaged partitioning nets can no longer fulfil
their functions and must be replaced. Visit a quali-
fied specialist workshop.
Partitioning net in the front position
Partitioning net in the rear position
#
To attach: extend and unfold the partitioning
net.
#
Attach the upper hooks of the partitioning net
to holders
1
on the roof lining.
#
Attach lower hooks
2
in eyelets
3
on the
left and right.
#
Pull on the loose ends of the lashing straps
until the partitioning net is tight.
#
After driving a short distance, check the ten-
sion of the partitioning net and re-tension it if
necessary.
#
To remove: pull the belt clamps until the lash-
ing straps are loose.
#
Remove lower hooks
2
from eyelets
3
on
the left and right.
#
Detach upper hooks from holders
1
.
Observe the notes on loading the vehicle
(
/
page 120).
Seats and stowing 131
Summary of Contents for GLC 200 4MATIC
