Mercedes-Benz GLC 200 4MATIC, Owner'S Manual

Page: 193 / 601

-
headlamps and tail lamps
-
tyres, wheels and wheel arches
-
underbody
R
After driving through sand, mud, water or
gravel, have the following components
checked and cleaned:
-
brake disks and brake pads
-
tyres and wheels
-
axle joints
ECO start/stop function
▌ ECO start/stop function
%
Plug-in hybrid: this function is not available.
% Depending on the engine, the ECO start/stop
function is not available in all drive programs.
Observe the status display on the driver's dis-
play concerning this.
The engine will be switched off automatically in
the following situations if all vehicle conditions for
an automatic engine stop are met:
R
You brake the vehicle to a standstill in trans-
mission position
h
or
i
.
R
You depress the brake pedal when travelling at
a low speed.
If the system has detected one of the following
situations, the engine will not stop:
R
You stop at a stop sign and there is no vehicle
in front of you.
R
The vehicle that stopped in front of you starts
up again.
R
You manoeuvre, turn the steering wheel
sharply or engage reverse gear.
%
If the system detects an intelligent stop inhibi-
tor, e.g. a stop sign, the engine will not stop.
If you activate the HOLD function or engage
the park position
j
, the engine can be
switched off in spite of an intelligent stop
inhibitor.
The engine will restart automatically in the follow-
ing cases:
R
You engage transmission position
h
or
k
.
R
You depress the accelerator pedal.
R
The vehicle requires an automatic engine
start.
R
You release the brake pedal.
R
You release the brake pedal on a downhill gra-
dient and the vehicle does not roll.
R
The vehicle rolls on a downhill gradient and
does not automatically enter glide mode at
20 km/h.
Displaying the ECO start/stop function on the
driver's display:
R
The
è
symbol (green) appears when the
vehicle is at a standstill: the engine was
switched off by the ECO start/stop function.
R
The
ç
symbol (yellow) appears when the
vehicle is at a standstill: not all vehicle condi-
tions for an engine stop have been met.
R
Neither the
è
symbol nor the
ç
symbol
appears when the vehicle is at a standstill: an
intelligent stop inhibitor, e.g. a stop sign, has
been detected.
R
The s symbol appears: the ECO start/stop
function is deactivated or there is a malfunc-
tion.
190 Driving and parking