Mercedes-Benz CL2012, Operator'S Manual

Page: 99 / 488

Folding the backrest forwards
In order to make it convenient for passengers
to get in and out of the rear compartment, the
driver's or front-passenger seat:
R
is automatically moved forwards when the
backrest is folded forwards
R
is automatically moved backwards when
the backrest is folded back
X
Pull seat release handle
:
in the direction
of the arrow and fold the backrest
forwards.
The head restraint is lowered and the seat
moves forwards.
Folding back the backrest
X
Fold the seat backrest back until it
engages.
The seat moves to its original position. The
head restraint is raised. The seat backrest
is engaged again.
Adjusting the multicontour seat
You can adjust the multicontour seat using
COMAND (
Y
page 239).
Adjusting the active multicontour
seat
You can adjust the active multicontour seat
using COMAND (
Y
page 241).
i If PRE-SAFE
®
has been activated, the air
pressure in the air chambers (the side
bolsters of the seat cushion and backrest)
of the multicontour seat or active
multicontour seat is increased.
Adjusting the lumbar support
You can adjust the lumbar support using
COMAND (
Y
page 238).
Switching the seat heating on/off
Switching on/off
The three red indicator lamps in the button
indicate the heating level you have selected.
i If the battery voltage is too low, the seat
heating may switch off.
The system automatically switches down
from level
3 to level 2 after approximately
eight minutes.
The system automatically switches down
from level
2 to level 1 after approximately ten
minutes.
The system automatically switches off
approximately 20 minutes after it is set to
level
1.
X
Make sure that the SmartKey is in position
2 in the ignition lock.
X
To switch on: press button
:
repeatedly
until the desired heating level is set.
X
To switch off: press button
:
repeatedly
until all the indicator lamps go out.
Seats
97
Seats, steering wheel and mirrors
Z