Mercedes-Benz CL2012, Operator'S Manual

Page: 124 / 488

i You will find further information in the
"Destination entry" section (
Y
page 137).
Entering characters in the address and
the phone book
Introduction
The following section describes how to enter
characters in the phone book/address book
when creating a new entry.
Creating a new entry in the phone book
X
Call up the input menu with data fields
(
Y
page 190).
Phone book: input menu with data fields
:
Selected data field with cursor
;
Character bar
Creating a new entry in the address book
X
Call up the input menu with data fields
(
Y
page 190).
Input menu with data fields
:
Selected data field with cursor
;
Character bar
Entering characters
The example describes how to enter the
surname
Schulz .
X Select
S
by turning
cVd
and sliding
ZV Æ
the COMAND controller and press
W
to
confirm.
S
is entered into the data field. All
characters are shown in black and can
always be selected in the character bar.
The character bar offers characters
corresponding to the respective data field
(letters or digits).
:
To switch the character bar to upper-
case/lower-case letters
;
To switch the character bar from upper/
lower-case letters to digits
=
To change the language of the character
bar
?
To delete a character/an entry
X
Select c and confirm by pressing
W
the
COMAND controller.
The letter
c
is added to
S
in the data field.
X
Repeat the process until the name has
been entered in full.
X To enter a phone number: select the
digits one by one in the corresponding data
field by turning
cVd
and sliding
ZV Æ
the
COMAND controller and press
W
to
confirm.
Switching data fields
If you want to enter a first name after you have
entered a surname, for example, proceed as
follows to switch between the data fields:
122
At a glance
COMAND