Mercedes-Benz CL2012, Operator'S Manual

Page: 240 / 488

Adjusting the footwell temperature
You can use the
Footwell Temperature
function to set the temperature difference
between the footwell and the rest of the
vehicle interior.
i This setting is quite effective in automatic
mode, especially at low outside
temperatures.
The greater the value you set, the higher the
temperature in the footwell.
X
Select the climate control main menu in the
air-conditioning function bar by turning
cVd
the COMAND controller and press
W
to confirm.
The climate control menu opens.
X
Select Footwell Temperature and press
W
.
A scale appears.
X
To change the temperature difference:
slide
ZV Æ
or turn
cVd
.
X
To confirm your selection: press
W
.
Setting the blower settings for the air
vents
This function allows you to determine the way
the air is blown through the air vents in
automatic mode.
You can select:
R
Focused
(high blower setting)
R
Medium
(standard setting)
R
Diffuse (low blower setting)
i This setting is quite effective in automatic
mode, especially at high outside
temperatures.
If the vehicle has become very warm and the
automatic air conditioning is cooling the
interior, the blower settings are briefly
canceled.
X
Select the climate control main menu in the
air-conditioning function bar by turning
cVd
the COMAND controller and press
W
to confirm.
The climate control menu opens.
X Select
Airflow
and press
W
.
A menu appears.
The current setting is indicated by a
#
dot.
X
To change the airflow: slide
ZV Æ
or turn
cVd
.
X To confirm your selection: press
W
.
Seats
Lumbar supports
The lumbar support in the backrest of the
driver's and front-passenger seats can be
adjusted to provide optimum support for your
back.
X
To select the seat: press the
T
function button.
The main area of the COMAND display is
active. A scale appears.
238
Vehicle
COMAND